Model 150

Adjustable Pulsation Dampeners

The Model 150 Adjustable Pulsation Dampener and the Non-Adjustable Snubber Ball Check offers protection surge and/or pressure spikes. The 316 stainless steel ball is driven on seat by the pressure surge and held on seat as long as the differential pressure exists across the ball, while metering pressure to the instrument through a calibrated, groove across the ball seating area.

Order Online Now

Product Features/Benefits

Model 150 Pulsation Dampener & Non-Adjustable Ball Check Snubbers
Controlled Leak Check for Protection against Pressure Spikes
Fine Control Needle Valve for Adjustable Pressure Pulsation Dampening
3,000 PSIG (204 Bar) 5,000 PSIG (340 Bar) or 10,000 PSIG (680 Bar) Working Pressure
Product Features/Benefits Non-Adjustable Ball Check Snubber
Ball Check offers Protection against Surge and or Pressure Spikes
316 Stainless Steel Ball is Driven on seat by the Pressure Surge
3,000 PSIG (204 Bar) or 5,000 PSIG (340 Bar) Working Pressure
For complete model details See Bulletin_150.pdf
Installation and Operation Manual See Bulletin: IOM_150.pdf

Specifications / Configuration

Female NPT X Male NPT design
Model 150 available in ¼” FNPT X ¼” NPT and ½” FNPT x ½” NPT
Working Pressures up to 10,000 PSIG (680 Bar)
Non-Adjustable Snubber available ¼” FNPT x 1/4” NPT only
Working Pressures up to 3000 PSIG (200 Bar) Non-Adjustable Snubber
Material of Construction of Body - Brass, and 316/316L Stainless Steel
Operating Temperatures: Based on Elastomer Material
Elastomers Model 150 (Seal Materials) Buna-N & Teflon, Viton & Teflon, Neoprene & Teflon and Ethylene Propylene & Teflon
Elastomers Non-Adjustable Snubbers: Not Applicable
For complete specifications see: Specificationsheet_150.pdf